產品展示
硬脂酸
Stearic acid
特性:硬脂酸即十八烷酸,不含不飽和鍵的脂肪酸,由油脂水解產生。白色或微黃色結晶粉末,融化后成透明狀液體。
Physical properties: Stearic acid, also known as octadecanoic acid, a fatty acid without unsaturated bonds, is produced by hydrolysis of oils. White or slightly yellow crystalline powder, it becomes a transparent liquid after melting.
用途:主要用于制造各種硬脂酸鹽類、橡膠助劑等。在橡膠的合成和加工過程中起重要作用,是天然膠、合成橡膠和膠乳中廣泛應用的硫化活性劑,也可用作增塑劑和軟化劑。在生產合成橡膠過程中需加硬脂酸作乳化劑,在制造泡沫橡膠時,硬脂酸可作起泡劑,硬脂酸還可用作橡膠制品的脫模劑。
Uses: Mainly used in the manufacture of a variety of stearic acid salts, rubber auxiliaries, etc.. It plays an important role in the synthesis and processing of rubber. Stearic acid is a widely used vulcanizing active agent in natural rubber, synthetic rubber and latex, and can also be used as a plasticizer and softener. In the production of synthetic rubber, stearic acid is used as emulsifier, in the manufacture of foam rubber, stearic acid can be used as a foaming agent, stearic acid can also be used as a mold release agent for rubber products.
指標:
Specification:
|
型號 TYPE 指標 SPEC |
碘值 Iodine Value (gI/100g) |
酸值 Acid Value (mgKOH/g) |
皂化值 Saponification value (mgKOH/g) |
熔點 Melting Point ℃ |
水分 Water content % |
|
YZS-1 |
10-19 |
206-215 |
208-218 |
59-63 |
≤0.3 |
|
YZS-2 |
20-30 |
206-215 |
208-218 |
55-58 |
≤0.3 |
包裝:內裝聚乙烯塑料薄膜的聚丙烯編織袋,25千克/袋。
Packing: Polypropylene woven bag lining with polythene plastic film, 25kg/bag.
首頁 > 產品展示
硬脂酸
Stearic acid
特性:硬脂酸即十八烷酸,不含不飽和鍵的脂肪酸,由油脂水解產生。白色或微黃色結晶粉末,融化后成透明狀液體。
Physical properties: Stearic acid, also known as octadecanoic acid, a fatty acid without unsaturated bonds, is produced by hydrolysis of oils. White or slightly yellow crystalline powder, it becomes a transparent liquid after melting.
用途:主要用于制造各種硬脂酸鹽類、橡膠助劑等。在橡膠的合成和加工過程中起重要作用,是天然膠、合成橡膠和膠乳中廣泛應用的硫化活性劑,也可用作增塑劑和軟化劑。在生產合成橡膠過程中需加硬脂酸作乳化劑,在制造泡沫橡膠時,硬脂酸可作起泡劑,硬脂酸還可用作橡膠制品的脫模劑。
Uses: Mainly used in the manufacture of a variety of stearic acid salts, rubber auxiliaries, etc.. It plays an important role in the synthesis and processing of rubber. Stearic acid is a widely used vulcanizing active agent in natural rubber, synthetic rubber and latex, and can also be used as a plasticizer and softener. In the production of synthetic rubber, stearic acid is used as emulsifier, in the manufacture of foam rubber, stearic acid can be used as a foaming agent, stearic acid can also be used as a mold release agent for rubber products.
指標:
Specification:
|
型號 TYPE 指標 SPEC |
碘值 Iodine Value (gI/100g) |
酸值 Acid Value (mgKOH/g) |
皂化值 Saponification value (mgKOH/g) |
熔點 Melting Point ℃ |
水分 Water content % |
|
YZS-1 |
10-19 |
206-215 |
208-218 |
59-63 |
≤0.3 |
|
YZS-2 |
20-30 |
206-215 |
208-218 |
55-58 |
≤0.3 |
包裝:內裝聚乙烯塑料薄膜的聚丙烯編織袋,25千克/袋。
Packing: Polypropylene woven bag lining with polythene plastic film, 25kg/bag.